SOLVENT-FREE PEELABLE COATING
FOR PLASTICS THERMOFORMING INDUSTRIES
Shock-resistant, scratch-resistant protection
Masking - Protective materials
for Thermoplastics, Thermohardening Materials
Engineering plastics, Composites
Painted coated metals
Metals that are not sensitive to corrosion
DESCRIPTION
Water-based peelable varnish for the protection of non-corrosion-sensitive substrates. Advantageously replaces the classic peelable varnishes, formulated with solvents in respect of:
- ergonomics – odourless product,
- toxicology – no danger pictograms,
- fire safety – non-flammable product,
- the environment – the product is VOC-free and environmentally friendly.
Remains flexible at low temperatures.
No corrosive action on surfaces. No change in refractive index on transparent substrates.
UV protection.
PROTECT PE 4748 is not an anti-corrosive peelable varnish. Solvent-free, it will not disintegrate or saturate painted surfaces. On the other hand, it can be used on metallic substrates that are not sensitive to corrosion such as stainless steels, light alloys, anodised light alloys, galvanized and electrogalvanized steels, dichromates and titanium alloys. Lacquered metal sheets.
The dry film of PROTECT PE 4748 is temperature resistant and remains peelable, up to 302°F.
AREAS OF USE
Shock-resistant and scratch-resistant protection of aeronautical parts, cockpit canopies in polycarbonate or PMMA. Shielding during transport or major inspections (D.Check)
Protection of technical parts in the space technology field.
Protection of HIGH-TECH composite parts and prototypes.
Protection of ALU plastics processing moulds.
Masking before painting surfaces. Projective materials.
Protection of paint booth interior panels. Considerable labour time saving during cleaning operations.
Painting robots.
Protection of ALU, PVC or PE frames before installation.
TYPICAL PHYSICAL AND CHEMICAL PROPERTIES
|
PROPERTIES |
STANDARD or METHOD |
VALUE |
UNIT |
|
Appearance |
Visual |
Liquid |
- |
|
Colour |
Visual |
Colourless amber |
- |
|
Odour |
Olfactory |
weak, practically odourless |
- |
|
Density at 68°F |
NF T 30,020 |
1.04 |
|
|
Brookfield viscosity M2 10 revolutions at 73.4°F |
|
9500-10,000 |
mPas |
|
Closed cup flash point |
ISO 2719 |
Without |
°F |
|
Output |
|
150-200 |
grs/m² |
|
dry film |
|
150 to 250 |
microns |
|
Drying time at 68 °F |
|
4-5 |
hours |
DIRECTIONS FOR USE
Can be used on smooth surfaces.
Does not need to be diluted. Ready to use.
can be used with a brush or a paintbrush.
by spraying:
with guns, preferably Airless or Airmix
nozzle 0.5 mm
pressure 4 to 6 bar max
Apply to clean, grease-free surfaces
Optimal atmospheric conditions:
Temperature above 50°F - Relative humidity below 75%
Store away from frost in a sheltered location.
The application equipment must be cleaned with water.
PRESENTATION
30 kg drum
Looking for another product?
|
Discover our entire range by clicking on the photo |
.jpg)
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 